手机版 |
产品分类 |
光学仪器及设备
色彩雾度仪
日本电色光泽度仪VG8000
日本电色雾度仪NDH8000
TQC比色光箱
堀场HORIBA光泽度仪IG-340
日本电色间接测定式镜面反射率计MG-II 7000
日本电色直接测定式镜面反射率计MG-I 7000
日本电色长光路分光色差仪ASA-2
日本电色高感度浊度计/粒子计数器NP6000T
日本电色光泽计PG-II/II M
恒温/加热/干燥设备
SNOL工业用低温电烘箱
SNOL管式炉
SNOL陶瓷箱式炉(900-1300℃)
SNOL高温纤维隔热箱式炉(1100℃-1600℃)
SNOL纤维隔热马弗炉(1100℃,1300℃)
SNOL井式电炉
SNOL 200多腔电烘箱
SNOL 350低温电箱式烘箱(350℃)
SNOL 300低温电箱式烘箱(300℃)
SNOL 200/200低温电箱式烘箱
测量/计量仪器
全自动红外体温筛查仪692
柴田科学SIBATA便携式空气采样泵MP-W5P
柴田科学SIBATA数码孔板流量仪OFD-1
柴田科学SIBATA采样泵用基准流量计FC-L1 /FC-M1
岛津汽车内饰材料检测
Elcometer 118表面湿度表
Elcometer7420数字型湿度仪
YT2002应力验测机
YT308望远镜光学测试仪
YT316棱镜度测量仪
其他
日本理研吸波暗室
LUCEO应力仪LSM系列
TQC低压微孔检测仪
TQC粗糙度比对块
TQC船体粗糙度仪DC9000
TQC杯突试验仪
TQC摆杆硬度计SP0500/SP0501
德国马尔
粉碎机
QuEChERS吸附剂
水质分析
TOXmini便携式生物毒性检测仪
horiba含油分析仪OCMA-550
HORIBA油分分析仪OCMA-555
堀场水质分析仪
HORIBA台式水质分析
HORIBAHD系列
HU-200SS
horiba ocma350含油分析仪
horiba(堀场)ocma505红外测油仪
共立理化水质检测仪
气体检测仪
呼吸节律发生器SRRG-1
柴田科学SIBATA高流量空气采样仪HV-RW
无油空气压缩机WondaLab W58-G
HORIBA-APDA-370大气颗粒物监测仪
Horiba便携式气体分析仪
TR-II系列烟气在线监测系统
烧结机脱硫
烟气脱硫系统
烟气脱硫
testo 350烟气分析仪
试验机
银宗球类冲击测试机YT-330
島川热油试验机PH-500D
TQC包装罐摩擦试验机
James Heal马丁代尔耐磨仪1602W
德国REC紧固扭矩
电子万能动静态材料试验机(Electrodynamic Test Instrument)
水分测定仪
德国Brabender移动式塑料水分仪
TQC DewCheck露点仪
PMB53水分测定仪-艾德姆衡器
CT-3100水份测定仪
IR35标准型快速水份测定仪
IR60智能紧凑型快速水份测定仪
电化学仪器
CS-131 SC-1浓度计
794标准型自动电位滴定仪
785通用型自动电位滴定仪
702经济型自动电位滴定仪
719 SET基本型自动电位滴定仪
工业在线及过程控制仪器
826型便携式pH计
827型PH计
780高级PH计
744型PH计
712型电导率仪
纯化设备
Super-Q Plus超纯水系统
Milli-Q超纯水系统
超纯水器Ultra系列
超纯水器Classic系列
X射线仪器
X射线分析显微镜
Horiba X射线荧光分析仪
Horiba X射线分析显微镜
XGT-1000WR/1700WRX射线荧光分析仪
环境试验箱
TQC表面盐分测试套装
TQC C&W腐蚀试验箱
日本ETAC环境试验箱/恒温恒湿箱
盐雾腐蚀试验箱CORROSIONBOX
比表面积测定仪
TQC表面预处理套装
瑞士AB302显微测厚仪
德国汉高胶水
相关仪表
导热系数测量装置
PLC工控系统
粘度计
ATAC粘度计
TQC蔡恩杯(流出杯)
无损检测/无损探伤仪器
超声波点焊探伤仪
热分析仪
EKO热导率测试仪HC-10
微生物检测仪器
BACTcontrol在线大肠菌及总菌分析仪
包装行业专用仪器
自动泄露检查器
光谱检测分析仪
日本分光光度计FI/IR NRS
实验室粉碎设备
SuperFLX研磨机
石油专用分析仪器
OIL-1型石油产品颜色测量仪
测厚仪
TQC Positector6000膜厚测试仪
激光粒度仪
空气粒子计数器
燃烧测定仪
SR613水平垂直燃烧测试仪
分子生物学仪器
iTOXcontrol在线综合生物毒性检测仪
联系方式 |
产品系列
712 型电导仪
主要功能及特点
conductivity measurement has top priority when the quality of water samples needs to be checked. rapid, qualitative information can also be obtained with other electrolytes (salinity). a wide range of usesconductivity measurements in the range 0.001 µsiemens/cm to 20 siemens/cm with automatic range switching two lines of 16 alphanumeric characters each are available for the sample identification a typical glp component: the last calibration of the measuring cell and the last determination of the temperature coefficient can be verified designation and serial number of the instrument as well as date and time appear on the printout measurement ranges specially designed for conductivity titrations with compensation temperature measurement from -170 °c to 500 °c tds measurements (total dissolved solids (salinity) 0.5 mg/l ... 300 g/l nacl) with "frequency auto", the 712 conductometer automatically se-lects the measurement frequency best suited to the sample (300 hz or 2.4 khz) "auto zero" sets the current conductivity to zero. changes can thus be followed with a higher resolution the freely se-lectable reference temperature allows matching to the measurement instructions of many different standards the switching, alarm or limit outputs, which can be used in all measurement modes as a minimum/maximum make or break contact with hysteresis adjustment, are popular additional functions for open- and closed-loop control tasks. you thus save, among other things, an expensive controller. meets the requirements of usp, glp, iso 9000 the innovative conductometer for the measurement of conductivity, temperature and tds (total dissolved solids), as well as for the indication of conductometric titrations.measuring range conductivity 0.001 microsiemens/cm to20 siemens/cm temperature (pt100/pt1000) - 170 ... + 500 °c tds (total dissolved solids) 0.5 mg/l ... 300 g/l nacl automatic determination of the cell constant and the temperature coefficient of the sample automatic temperature compensation for conductivity measurements high resolution in conductivity and temperature measurements, due to built in compensation and «auto zero» function current output for platinisation of conductivity measuring cells (iplat = 20 ma) manual or automatic se-lection of measuring frequency analogue output with programmable range bi-directional rs 232c interface for pc or printer (results and reports) real-time plot function of conductivity and temperature versus time on printer i/o lines for limit values (min/max) and sample changer
技术参数:
712 型电导仪
主要功能及特点
conductivity measurement has top priority when the quality of water samples needs to be checked. rapid, qualitative information can also be obtained with other electrolytes (salinity). a wide range of usesconductivity measurements in the range 0.001 µsiemens/cm to 20 siemens/cm with automatic range switching two lines of 16 alphanumeric characters each are available for the sample identification a typical glp component: the last calibration of the measuring cell and the last determination of the temperature coefficient can be verified designation and serial number of the instrument as well as date and time appear on the printout measurement ranges specially designed for conductivity titrations with compensation temperature measurement from -170 °c to 500 °c tds measurements (total dissolved solids (salinity) 0.5 mg/l ... 300 g/l nacl) with "frequency auto", the 712 conductometer automatically se-lects the measurement frequency best suited to the sample (300 hz or 2.4 khz) "auto zero" sets the current conductivity to zero. changes can thus be followed with a higher resolution the freely se-lectable reference temperature allows matching to the measurement instructions of many different standards the switching, alarm or limit outputs, which can be used in all measurement modes as a minimum/maximum make or break contact with hysteresis adjustment, are popular additional functions for open- and closed-loop control tasks. you thus save, among other things, an expensive controller. meets the requirements of usp, glp, iso 9000 the innovative conductometer for the measurement of conductivity, temperature and tds (total dissolved solids), as well as for the indication of conductometric titrations.measuring range conductivity 0.001 microsiemens/cm to20 siemens/cm temperature (pt100/pt1000) - 170 ... + 500 °c tds (total dissolved solids) 0.5 mg/l ... 300 g/l nacl automatic determination of the cell constant and the temperature coefficient of the sample automatic temperature compensation for conductivity measurements high resolution in conductivity and temperature measurements, due to built in compensation and «auto zero» function current output for platinisation of conductivity measuring cells (iplat = 20 ma) manual or automatic se-lection of measuring frequency analogue output with programmable range bi-directional rs 232c interface for pc or printer (results and reports) real-time plot function of conductivity and temperature versus time on printer i/o lines for limit values (min/max) and sample changer
主要特点:
712 型电导仪
主要功能及特点
conductivity measurement has top priority when the quality of water samples needs to be checked. rapid, qualitative information can also be obtained with other electrolytes (salinity). a wide range of usesconductivity measurements in the range 0.001 µsiemens/cm to 20 siemens/cm with automatic range switching two lines of 16 alphanumeric characters each are available for the sample identification a typical glp component: the last calibration of the measuring cell and the last determination of the temperature coefficient can be verified designation and serial number of the instrument as well as date and time appear on the printout measurement ranges specially designed for conductivity titrations with compensation temperature measurement from -170 °c to 500 °c tds measurements (total dissolved solids (salinity) 0.5 mg/l ... 300 g/l nacl) with "frequency auto", the 712 conductometer automatically se-lects the measurement frequency best suited to the sample (300 hz or 2.4 khz) "auto zero" sets the current conductivity to zero. changes can thus be followed with a higher resolution the freely se-lectable reference temperature allows matching to the measurement instructions of many different standards the switching, alarm or limit outputs, which can be used in all measurement modes as a minimum/maximum make or break contact with hysteresis adjustment, are popular additional functions for open- and closed-loop control tasks. you thus save, among other things, an expensive controller. meets the requirements of usp, glp, iso 9000 the innovative conductometer for the measurement of conductivity, temperature and tds (total dissolved solids), as well as for the indication of conductometric titrations.measuring range conductivity 0.001 microsiemens/cm to20 siemens/cm temperature (pt100/pt1000) - 170 ... + 500 °c tds (total dissolved solids) 0.5 mg/l ... 300 g/l nacl automatic determination of the cell constant and the temperature coefficient of the sample automatic temperature compensation for conductivity measurements high resolution in conductivity and temperature measurements, due to built in compensation and «auto zero» function current output for platinisation of conductivity measuring cells (iplat = 20 ma) manual or automatic se-lection of measuring frequency analogue output with programmable range bi-directional rs 232c interface for pc or printer (results and reports) real-time plot function of conductivity and temperature versus time on printer i/o lines for limit values (min/max) and sample changer